MILESTONE
USER MANUAL
Ethos EZ User manual MA073-006 Introduction Chapter -5-
ETHOS EZ
ETHOS EZ TECHNICAL SPECIFICATIONS
• Microwave labstation for quality control for digestion, drying and
evaporation/concentration procedures.
• Patented, self-sealing, pressure responsive, stainless steel door with protected glass
window for visual inspection.
• Magnetrons protected from reflected microwave power.
• Delivered microwave power 1.200 Watts in 1 Watt increments.
• User-selectable continuous and pulsed microwave emission.
• Large microwave cavity 35 x 35 x 35(h) cm.
• Cavity illumination.
• Microwave cavity all made of 18/10 stainless steel housing with multilayer Teflon
plasma coating applied at 350°C.
• All hardware protected against acid/organic solvents with polymer coating both inside
and outside surfaces.
• Total of 7 micro-switches of which 4 safety interlocks to prevent microwave emission
with open door.
• Exhaust located above the cavity separate from electronics to prevent any corrosion.
• Weight: ca. 90 kg
• Dimensions 368x348x340mm (14,5’’x13,7”x13,4”)
• Power 220V/50-60Hz, 3.5 kW
Advanced Controls
• ATC-400CE Automatic Temperature Control for direct monitoring of vessel content,
reaction temperature up to 300°C
Control Terminal 660
• Control terminal 660, touch screen, industrial grade controller 6.5" screen with 65.000
colours.
• VGA resolution 640x480 for sharp process graphic.
• 4 USB ports to connect external devices (mouse, keyboard, printers).
• Virtually unlimited storage of microwave digestion methods inclusive of multiple steps
each; each step includes microwave power, time internal and external temperature,
and pressure.
• Removable Windows-compatible USB pen-drive for automatic saving and downloading
of microwave methods and runs.
To Next Page
Loading...
