Need help?Do you have a question about the Milestone UltraGROSS and is the answer not in the manual?
Explains various symbols used throughout the manual for safety and operational guidance.
Details the intended use of the UltraGROSS system in histopathology for specimen preparation and cutting.
Provides detailed technical specifications, including power, dimensions, and component configurations.
Outlines the standard pre-configured models of the UltraGROSS system and their respective codes.
Provides detailed specifications on lighting, structure, and seating compatibility for the UltraGROSS unit.
Lists important warnings regarding equipment usage, maintenance, and warranty voidance.
Details the necessary environmental conditions for optimal operation and safety of the UltraGROSS unit.
Specifies the minimum clearance space required around the unit for installation of the '180' model.
Provides a step-by-step guide for unpacking the UltraGROSS unit and verifying all components are present.
Guides the user through the physical installation process of the UltraGROSS unit.
Explains how to install and use the safety shield block for operator protection.
Details the procedure for installing the camera component on specific UltraGROSS models.
Explains how to connect the hot and cold water inlets to the UltraGROSS unit.
Details the procedure for connecting the wastewater drain pipe from the unit to the laboratory's drain system.
Describes connecting the unit to a fume extraction system for models with an active hood.
Guides the user on how to connect the unit to power and turn it on using the main switch.
Outlines essential checks to perform after installation to ensure the unit and its systems are functioning correctly.
Explains the various alarms and warnings the operator may encounter and how to respond to them.
Covers the system's general settings, including institute/department names and filter management.
Details preventive maintenance schedules and procedures for the UltraGROSS unit.
Explains how to set up and use the remote assistance feature for technical support.
Outlines critical precautions to follow during the cleaning of the UltraGROSS unit and its components.
Details the operating procedures for using SUPRASPOR disinfectant with the UltraGROSS system.
Advises on annual maintenance and regular inspections required to keep the unit in safe operating condition.
Details the Filterbox Kit, including its components and installation for HEPA filtration.
Provides specifications and installation requirements for the optional waste grinder unit.
Provides solutions for common problems encountered with the waste disposal unit, such as blockages or leaks.
Provides information about the VIROCLEAN unit, its operation, and installation.
Details the optional managed switch for network connectivity and remote management.
Guides the user through the process of mounting and connecting the managed network switch.
Explains how to establish a remote connection for support and troubleshooting.
Outlines the procedures and safety precautions for returning the unit for repair, including decontamination requirements.
Details the proper disposal methods for empty SUPRASPOR reagent bottles, treating them as hazardous.
Provides guidelines for the safe disposal of used fixative, noting potential hazards and regulatory compliance.
General| Brand | Milestone |
|---|---|
| Model | UltraGROSS |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
