25
1.7. Warnings
The equipment must be connected to sockets that are clearly visible for the operator.
All equipment parts and all optional parts must only be supplied by the manufacturer.
The instrument is supplied with replaceable fuses, but their replacement must be effected by trained and
authorized SERVICE personnel. If the system is still not properly working, contact your local representative or
the manufacturer (always provide the serial number of the unit, see label on the unit).
In the event of a malfunction:
1. Switch the PC off (if present).
2. Switch the unit off.
3. Disconnect whatever is connected to the auxiliary sockets.
4. Unplug the power supply cable of the unit from the main socket.
5. Disconnect all the optional parts, if any.
6. Disconnect the water, after having closed the delivery lines and other utilities.
7. Clean and decontaminate all parts of the unit as described in chapter 4.
8. Put all parts of the equipment into the package supplied by the manufacturer (original package).
9. Send the unit to the manufacturer for repair.
1.7.1. Personal data safety
The device is not designed to manage personal data processing of natural persons.
The personal data of natural persons must not be entered into the device while it is used.
The user operating the device must take appropriate measures to ensure that no personal data are entered.
All data referring to natural persons must therefore be entered by “pseudonymisation”.
“Pseudonymisation” refers to a manner of processing personal data so that said data cannot be associated to
a specific data subject unless additional information is used, provided that the said additional information is
stored separately and is subject to technical and organizational measures to ensure that such personal data
are not associated to an identified or identifiable natural person.
1.8. MacroPATH data backup
Only for models with letter T and C – see chapter 1.3.1.
The size of images with the recommended settings is 1.5MB/image (see chapter 3).
To Next Page
Loading...
