MM182-001 – Operator Manual
7
1. INTRODUCTION
1.1. Symbols used
The instructions marked by this symbol are important and must be read carefully.
An instruction marked by this WARNING symbol means caution is required. Failure to
follow the instruction may endanger the user or cause damage to the instrument.
An instruction marked with this symbol means caution is required as there is an electric
shock hazard. Carefully follow the instruction in order to prevent this kind of accident.
Biohazard: pay attention when performing a procedure marked with this symbol, as
there is biological contamination hazard.
Attention, risk of hand crushing.
Attention, toxic substance.
CE Logo: this instrument complies with European Community directives.
Specifies the manufacturer’s serial number.
Hot water (UNI EN 13792).
Cold water (UNI EN 13792).
Formaldehyde (UNI EN 13792).
Avoid sprays and direct jets.
WEEE European directive (2012/19/EC) symbol:
electric/electronic material, do not release into the environment.
Authorized and qualified customer support personnel only.
To Next Page
Loading...
