24
USE CONDITIONS OF THE HOOD:
1.4. Compatible reagents
Water, Formalin 10% v/v (4% w/v), zinc formalin (no chloride), FineFIX, alcohol-based fixatives, inks.
1.5. Transport and storage conditions
Temperature: –20°C to +60°C (-4°F to 140°F)
Humidity: up to 80% (up to 50% at 40°C – 104°F) non-condensing
1.6. Antivirus
Only for models with letter T – see chapter 1.3.1.
Milestone recommends installing antivirus software. As Milestone does not install antivirus software, the user
can choose the preferred version according to their needs.
Pay attention when setting the Antivirus so that the data flow on the USB protocols and accesses to the hard
disk are not limited.
The hood must not be considered a deposit for chemical substances because they interfere
with air flows.
Do not use Bunsen or naked flames below the hood.
Do not use steaming reagents below the hood.
Place the specimen at least 15cm from the edge of the hood.
Do not perform sudden movements inside the hood.
Do not insert your head into the hood when there are hazardous substances inside.
Do not dispose of reagents by evaporating them into the hood.
DO NOT USE ANY REAGENTS OTHER THAN THOSE LISTED ABOVE.
In case of doubts, please contact: application@milestonemedsrl.com.
To Next Page
Loading...
