MM182-001 – Operator Manual
27
2. INSTALLING UltraGROSS
Before switching on the unit (when coming from a storage location), allow the
instrument to reach operating environment conditions (at least 30 minutes).
This chapter and the next will illustrate all the features of UltraGROSS.
The ROSAI model is displayed below.
Milestone UltraGROSS is an instrument that must be unpacked and installed with the utmost care.
Do not push. Do not handle the unit in areas marked with this symbol.
Make sure that the unit is placed on a level floor that is free of vibrations and not in contact with flammable
material. Use the levelling feet to position the unit.
Make sure that the unit is placed at a proper distance from walls as described in the following chapter.
To Next Page
Loading...
