136
5.10.6. Troubleshooting
Should the waste disposal unit block, do not try to unblock it by inserting your hands or tools but rather use the
supplied Allen wrench. Follow the instructions below.
What to do if the Waste disposal unit blocks or switches off automatically
• Disconnect power.
• Using the supplied Allen wrench, unblock the disk of the waste disposal unit by turning it completely three
times clockwise and anti-clockwise.
• Extract the foreign body that caused the blockage.
• Reconnect power.
• Turn the automatic switch back on.
What to do if unallowed items drop accidentally
• Disconnect power.
• Extract the foreign body that caused the blockage.
• Reconnect power.
What to do in case of a reduced water outflow
• Disconnect power.
• Call customer support.
Caution: the heat sink considerably reduces grinding capacity.
What to do if water leaks from the Waste disposal unit body or it makes strange noises
• Disconnect power.
• Call customer support.
To Next Page
Loading...
