120
5.3. Filterbox Kit with HEPA filter
The Filterbox Kit with HEPA filter (CODE 109232) consists of the following parts:
• Fumes filter.
Dimensions: 618 mmx780 mmx1450 mm
Weight: 72kg
• Flexible Pipe Kit (200 mm diameter), which includes: 3m pipe and 4 straps.
• Coupling.
The box of the fumes filter in PVC is resistant to acids and consists of: a pre-filter G4 (CODE 102922), 10
sheets of activated charcoal filter (CODE 102923) and a HEPA H14 filter (CODE 102924).
Weights:
Charcoal cartridge (LSTBCN): 1Kg
HEPA14 (LSTH14/K5): 11.4Kg
HEPA14 efficiency: 99.995%
Active charcoal filter efficiency: 70%
There are 3 ways of installing the filter:
- on the wall, via the designated slots (the wall must be able to support a weight of 72kg),
- placed on the floor,
- placed on the floor via the set of feet supplied.
The filter can be installed in any position: horizontal, vertical, oblique.
It must be fixed to the wall with the 4 dedicated holes.
Use specific fixing systems based on the type of wall used.
To Next Page
Loading...
