MILESTONE
USER MANUAL
ETHOS EZ User manual MA073-006 Terminal chapter Page - 62 -
SAVE PROCESS RUN
Enter under
Name
a designation (max. 15 characters). The ending
.dpr
will be automatically added at the end of the name.
Save the run preferably in A:\Data. Touch
Save
icon to save the
current run.
Together with the run, in the same file, also the current method and
the associated sample table will be saved.
DELETE RUN
Select from the list the process-run to be cancelled. The name will
be shown in the
Name
field.
Touching the X (
Delete
) icon the selected run – after security
request to reconfirm - will be irrevocably cancelled.
Graphic Diagram
The single parameters of the diagram can be faded in and/or out touching the related icon. Then
the selected parameters will be shown in the diagram.
The drawn curves appear in the same colors as the pre-set curves, but in a stronger tone.
T1, RED
The curves (desired and measured) for Temperature 1 (internal
temperature of vessel)
T1, RED MULTIPLE (only for TempSURE)
The recalculated curves of internal temperature in according to the
infrared reading
T2, GREEN
The curves (desired and measured) for Temperature 2 (external
temperature of pressure reactor wall)
T2, GREEN Multiple (only for TempSURE)
The curves (desired and measured) for Temperature 2 (external
temperature of pressure reactor wall) in each single vessel
P, BLUE
The curves for pressure.
E, BLACK
The curve for actually radiated microwave energy.
To Next Page
