MILESTONE
USER MANUAL
ETHOS EZ User manual MA073-006 Terminal chapter Page - 61 -
ZOOM
Drawing a rectangle on the screen with touch or mouse (on the left)
user can select a cutout of the diagram. Move the cursor from the
left upper corner to the right lower corner and hold the final position
for at least half second before releasing.
The cutout can be shifted in all directions clicking into the diagram
with button-held mouse.
ZOOM-OUT
Touch
„Zoom Out“
to return to full screen vision.
If a cutout is selected in the diagram, then it will also be used for
printing.
INFO
This opens the
System-Data
. Here user can give the data to the
system. 12 lines are available for remarks.
As pre-setting the data are taken over from the section
Administration
/ Settings/ System-Data
. The System-Data are
printed out together with the run report.
Open/Save/Delete Process Run
OPEN PROCESS RUN
The open symbol will appear to open one of the process runs saved
on the Flash Card and the associated method.
Select the desired run from the list. The name will be shown in the
Name
field.
Touching the
Open
icon to open the selected run and the window
will be quitted.
Along with the process-run, also the along-saved method and table
will be loaded.
To Next Page
