MILESTONE
USER MANUAL
ETHOS EZ User manual MA073-006 Terminal chapter Page - 81 -
55 The battery which supplies the clock of your
panel is empty.
Therefore date and time of the panel have been
lost.
Please inform your next service partner and
adjust the
date and time of your panel
This message appears when the Lithium battery (Type
CR1225) is empty. The clock will automatically reset
to 01.01.2000, 00:00:00. The time is only needed to
save data on the Flash Card (File-Date).
If you need the clock, contact your local service.
58 The image could not be read.
Please inform your local service partner.
Error occurred in reading a program to be installed.
Either the Flash Card is not readable or the program of
the type *.exe640 is damaged.
60 During the erase procedure a serious error
occurred. Please repeat your installation and
inform your next service partner.
During software update the terminal must be re-
started.
59 The update procedure finished. It is available
after a restart of the panel.
Shall the panel be restarted now?
An error occurred during software update. The
installation has to be repeated, as the old pro
ram was
partially deleted.
To Next Page
Loading...
