3. Press [ENTER] to open the Advance menu.
ð
Use [PAGE] to switch to the setting parameter SenseTime.
4. Activate the desired pad using the pad select buttons or by striking it.
ð
The name of the selected pad appears in the display.
5. Adjust the timespan for the pads using the rotary control [–] / [+] to the desired value
(range from 0 to 127).
6.
Activate the next pad or use [PAGE] to select another desired setting parameter.
The drum module allows you to adjust the touch velocity of the individual pads, i.e., the ratio
between strike pressure and resulting volume.
1. Press [SETUP].
2.
Use [PAGE] to select the menu item ‘Advance’.
3. Press [ENTER] to open the Advance menu.
ð
Use [PAGE] to switch to the setting parameter Trigger.
4. Activate the desired pad using the pad select buttons or by striking it.
ð
The name of the selected pad appears in the display.
Touch velocity
Operating
e-drum module
40
To Next Page
Loading...
