OWNER’S MANUAL
© 2007 MILLER Electric Mfg. Co.
OM-712 029 822F
2007−03
Use above FORM number when ordering extra manuals.
SWP-2 Spot Welder Pedestal (040 872)
ELECTRIC SHOCK can kill.
• Do not touch live electrical parts.
• Turn Off resistance spot welder, and disconnect
input power before inspecting or installing.
FILINGS AND TOOLS HITTING INSIDE
PARTS can damage unit.
• Cover parts.
• Clean unit and remove covers before operating.
MOVING PARTS can cause injury.
• Keep away from pinch points.
WARNING
3/8, 7/16, 1/2 in 3/32, 7/64 in
Tools Needed:
swarn3.1 2/93 / fwarn4.1 9/91
7/32 in
ST-800 203
See spot welder instruction manual for
procedure on adjusting tong pressure and
alignment before installing spot welder
onto pedestal.
Figure 1. Assembled SWP-2 (MSW Spot Welder And Timer Illustrated)
To Next Page
Need help?
General
