Miller S-64M - Section 13 − Maintenance and Troubleshooting; Routine Maintenance

OM-1585 Page 32
SECTION 13 − MAINTENANCE AND TROUBLESHOOTING
13-1. Routine Maintenance
Y Disconnect power before maintaining.
3 Months
Replace
unreadable
labels.
Clean and
tighten
weld
terminals.
Repair or
replace
cracked
weld
cable.
Check
14-pin cord.
Check gas
hose and
fittings.
Check gun
cable.
Replace
cracked
parts.
6 Months
Blow out or vacuum
inside. During heavy
service, clean
monthly.
Or
Clean
drive rolls.