Need help?Do you have a question about the Millipore Milli-Q Integral 15 and is the answer not in the manual?
General| Type | Water Purification System |
|---|---|
| Model | Milli-Q Integral 15 |
| TOC (Type 1) | < 5 ppb |
| Pyrogens (Endotoxins) (Type 1) | < 0.001 EU/mL |
| Production Rate (Type 1) | 15 L/h |
| Power Supply | 100-240 V, 50/60 Hz |
| Water Type | Type 1 |
| Resistivity (Type 1) | 18.2 MΩ·cm |
| Feed Water Source | Potable water |
| Purification Technology | Reverse Osmosis |
| Final Filter | 0.22 μm |
| Display | Touchscreen |
| Installation | Bench top |
| Operating Temperature | 5 to 35 °C |
| Operating Humidity | 10-80% (non-condensing) |
Technical specifications for water quality, weight, electrical, and environmental.
Overview of the installation chapter and a summary list of installation steps.
Step-by-step instructions for assembling the Q-POD Unit.
Identification and connection of tubings, cables, and power cord to the main cabinet.
Procedure for installing a new Quantum Cartridge into the Milli-Q System.
Procedure for installing a new Progard Pack into the Milli-Q System.
Procedure for calibrating the Milli-Q Water flowrate.
Visual representation of the software structure and navigation paths.
How to enter and use the Manager Menu for system settings.
Instructions on how to dispense water using the Q-POD Unit.
Steps to view Milli-Q and Elix water quality parameters.
Explanation of how alarms are displayed and different alarm types.
List of LCD alarm messages and their meanings.
Explanation of minor and major alert messages and their display.
List of LCD alert messages and their meanings.
To Next Page