Need help?Do you have a question about the Millipore Milli-Q UV Plus and is the answer not in the manual?
General| Brand | Millipore |
|---|---|
| Model | Milli-Q UV Plus |
| Category | Water Filtration Systems |
| Language | English |
Key features of the Milli-Q UV Plus system, including QPAK, UV lamp, and filters.
Explanation of the system's operational principles and components.
Describes the two primary operating modes of the system.
Essential electrical and feedwater specifications before system installation.
Guidance on unpacking, placing, and connecting components of the system.
Step-by-step instructions for installing the QPAK purification pack.
Procedure for purging air and carbon fines from the system.
Tasks to perform before operating the Milli-Q UV Plus system.
Procedure for discarding initial water output to ensure quality.
How to obtain purified water from the system for lab use.
Steps for properly shutting down the system for extended periods.
Instructions for replacing the QPAK purification pack.
Steps for replacing the polisher cartridge.
Procedure for removing and installing the UV lamp assembly.
Instructions for changing the Millipak 40 final filter.
Guide for checking and replacing system fuses.
List of Millipore offices and phone numbers for support.
Catalogue numbers for system parts, consumables, and accessories.
Detailed technical specifications of the Milli-Q UV Plus system.
Details of the product warranty and limitations.
Steps to open the system cabinet and access the PC board.
Procedure for replacing the fuse on the system's PC board.
Calibrating the temperature circuitry by adjusting the potentiometer.
Calibrating the resistivity sensor by adjusting the potentiometer.
Adjusting the contrast of the system's LCD display.
Modifying the pack replacement frequency setting on the PC board.
Instructions for connecting the system to a remote control unit.
To Next Page