Millipore Pellicon Single Pass TFF - Introduction; Catalog Numbers

Pellicon
®
Single Pass TFF Accessories Installation and User Guide 5
Introduction
This guide provides installation and maintenance procedures
for the Pellicon
®
Cassette Single-Pass TFF Accessories. It is not
intended to provide validation protocols or supporting data for
validation purposes. Refer to the appropriate Pellicon
®
Cassette
Validation Guide for this information. Refer to the Certificate of
Quality supplied with each Pellicon
®
cassette or hardware for
specifications. Refer to the appropriate cassette user guide for
additional information on installation and use.
The Pellicon
®
Cassette Single-Pass TFF Accessories must be
installed in the appropriate Pellicon
®
Cassette holder.
For supporting information on cassette installations, refer to the
following:
• Pellicon
®
2 Cassettes Maintenance, Installation and User Guide
• Pellicon
®
3 Cassettes Installation and User Guide
• Torque and Compression Force of Pellicon
®
2 and 3 Cassettes
Catalog Numbers
This user guide supports the following catalog numbers.
Catalog
Number
Description Cassette Size
XXSPTFF01
Pellicon
®
Single-Pass TFF
Mini Kit
Includes four diverter
plates and two silicone
gaskets
Pellicon
®
3 88 cm
2
and 0.11 m
2
Pellicon
®
2 0.1 m
2
XXSPTFF02
Pellicon
®
Single-Pass TFF
cassette diverter plate
Pellicon
®
3 0.57 m
2
and
1.14 m
2
Pellicon
®
2 0.5 m
2
XXSPTFF03
Pellicon
®
Single-Pass
TFF cassette retentate
collection plate
Pellicon
®
3 0.57 m
2
and
1.14 m
2
Pellicon
®
2 0.5 m
2