Millipore SDS 200 - Electrical Specifications; Environmental Specifications; Hydraulic Specifications

Product Information
SDS 200 - SDS 350 7
ELECTRICAL SPECIFICATIONS
Voltage / Frequency / Power Cat. Number Main Fuse
100V ±10%/50-60 Hz/800 VA with pump
TANK7P200
TANK7P350
10 A T fuse
Millipore SAS Spare Part FTPF04803
100V ±10%/50-60 Hz/10 VA without pump
TANK70200
TANK70350
1 A F fuse
Millipore SAS Spare Part FTPF00756
120V ±10%/60Hz/800 VA with pump
TANK6P200
TANK6P350
10 A T fuse
Millipore SAS Spare Part FTPF04803
120V ±10%/60Hz/10 VA without pump
TANK60200
TANK60350
1 A F fuse
Millipore SAS Spare Part FTPF00756
230V ±10%/50Hz/800 VA with pump
TANK5P200
TANK5P350
3.15 A T fuse
Millipore SAS Spare Part FTPF03213
230V ±10%/50Hz/10 VA without pump
TANK50200
TANK50350
0.5 A T fuse
Millipore SAS Spare Part FTPF00306
The source of electrical power must be earth grounded.
ENVIRONMENTAL SPECIFICATIONS
Indoor use only.
Ambient storage temperature: 5°C< T <40°C
Altitude: < 3000 m
Installation Category: II
Pollution Degree: 2
HYDRAULIC SPECIFICATIONS
Purified water inlet to reservoir: 8 mm OD tubing
Distribution loop: inlet and return ¾ inch NPT Male
Drain capacity (overflow): 220 LPH at a maximum height of 200 mm from floor level
Maximum length of drain tubing: 3 m