Millipore SDS 200 - Shipping Box Contents Checklist

Appendixes
SDS 200 - SDS 350 16
APPENDIX 2 CHECKLIST - WHAT’S INSIDE THE SHIPPING BOX
Please use this Appendix to confirm that all items were shipped to you and are accounted for. Use the checklist below and
account for each item prior to having a Millipore SAS Representative install your system.
Check the box
□
□ if the item is present.
Contact Millipore SAS if an item is missing.
Do you have?
 Reservoir capacity 200L or 350L (see chapter Ordering Information)
 Accessories bag including:
 2 fittings ¾”F-20M hose barb.
 1 elbow fitting ¾”F-20M hose barb.
 5 m long tube 19x27.5 mm.
 Vent filter: this accessory is not delivered with the systems and should be ordered separately.
 CD-Rom
 SDS 200-350 User Manual
Observed by
Name: __________________________________________________
Signature: _______________________________________________
Date: ___________________________________________________
Verified by
Name: __________________________________________________
Signature: _______________________________________________
Date: ___________________________________________________