Milltronics VM Series User Manual

C HAPTER 7 8200 CNC OPERATIONS
49
7) SPINDLE CW/STOP/CCW
o Spindle CW button – starts spindle in clockwise direction provided there is a
programmed spindle rpm.
o Spindle CCW button – starts spindle in counter-clockwise direction provided
there is a programmed spindle rpm.
o Spindle STOP button – stops spindle rotation.
8) EMERGENCY STOP button – Disables machine motion, control enable, and axis
waylube oiler. Emergency stop buttons lock down when pressed and must be
rotated to release.
9) ENABLE button – When pressed and released it enables axis and spindle
drives. All Emergency stop and limit switches must be released for drives to
enable.
10) Alphanumeric keypads – used to enter characters in MDI mode or program
mode.
11) Function keypad – used to select machine functions that are shown along the
bottom of the operator’s panel display.
For complete detailed information about the 8200 control and its operation, refer
to the 8200 Series CNC Operation Manual.

Milltronics VM Series Specifications

General

Brand	Milltronics
Model	VM Series
Category	Industrial Equipment
Language	English