To Next PageTo Next Page
Need help?Do you have a question about the Milpower Source M359-1 and is the answer not in the manual?
General| Brand | Milpower Source |
|---|---|
| Model | M359-1 |
| Category | UPS |
| Language | English |
Specifies the target environments and primary uses for the M359 UPS.
Explains the M359's main components, operational principles, and key features.
Identifies and describes the primary controls and indicators on the M359 front panel.
Details the function of each LED, bar graph, and push-button on the front panel.
Basic requirements for turning on the UPS and initial setup procedures.
Explains the different operational states the M359 can be configured to run in.
Details the normal operating mode where the UPS conditions and regulates power.
Describes the state when the UPS is powered down and inactive.
Explains the mode where AC power bypasses the UPS circuitry directly to the output.
Covers the mode where UPS functions are active but AC output is disabled.
Describes how to initiate and perform a functional test of the UPS.
Explains the function and operation of the main power switch on the front panel.
Details the switch for selecting the input power mode (UPS or Bypass).
Explains the switch for selecting the output power mode (UPS or Bypass).
Details the interface for controlling the UPS operation remotely via switches.
Explains the LEDs indicating the status of the AC input (FAIL/OK).
Details LEDs for output status (FAIL/OK) and standby mode.
Indicates UPS operation on battery and low battery status.
Shows shutdown due to overload or over-temperature, and warning status.
Shows the results of the battery self-test (PASS/FAIL).
Displays load level and battery charge status via bar-graphs.
Explains how the UPS transitions to and operates on battery power during AC input loss.
Details overload protection, current limiting, and recovery procedures.
Explains the UPS's behavior, warnings, and shutdown during over-temperature events.
Instructions for battery testing, service life factors, and storage guidelines.
Step-by-step instructions for safely removing and installing the M359's battery pack.
Procedures for cleaning and maintaining the unit's air filter for optimal cooling.
Details Ethernet SNMP, Dry Contacts, RS-232, and Remote Control interfaces.
Lists technical specs for input, output, battery, EMC, ESD, environment, and indicators.
Covers interface types, screening, acoustic noise, fungus resistance, and weight/size.
