TABLE OF CONTENTS
1 SAFETY INFORMATION -------------------------------------- 4
2 MARKING --------------------------------------------------------- 5
2.1 Agency approvals
3 TECHNICAL DEFINITION. --------------------------------------- 8
3.1 Technical specifications.
3.2 Product model coding.
4 START-UP. ----------------------------------------------------- 12
4.1 Recommendation.
4.2 Electrical Wiring.
5 OPERATION. -------------------------------------------------- 14
6 MAINTENANCE. ---------------------------------------------- 14
6.1 Installation area.
6.2 Electrical and temperature parameters.
6.3 Special operation conditions including incorrect practices.
6.4 Spare parts.
6.5 Returning units to the factory.
6.6 Trouble shooting.
7 STORAGE. ----------------------------------------------------- 19
7.1 Packaging & Storage.
7.2 What to check after storage?
7.3 What to check on pre-installed actuators?
8 MECHANICAL SET-UP. ----------------------------------------- 20
8.1 Adapting the actuator to your pump input.
9 ELECTRICAL CONNECTION AND TESTS. -------------- 21
10 ACTUATOR SETTINGS. ------------------------------------- 22
10.1 Setting up positioner board in direct setting mode.
11 How to change the acting mode and the fallback position?26
To Next Page
Loading...
Need help?
General
