To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M18 2607-20 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max RPM | 1, 800 RPM |
| Speed Settings | 2 |
| Battery System | M18 |
| Battery Type | Lithium-Ion |
| No Load Speed | 0-450/0-1, 800 RPM |
| Chuck Size | 1/2 inch |
| RPM | 0-1, 800 RPM |
| Tool Length | 7.75 in. |
| Max BPM | 28, 800 BPM |
Safety guidelines for the work environment, including cleanliness and lighting.
Precautions related to electrical hazards, cords, and grounding.
Guidelines for operator's alertness, attire, and protective equipment.
Proper techniques for using and maintaining power tools, including tool selection and maintenance checks.
Guidelines for charging, using, and storing battery packs safely.
Instructions for installing and removing the battery pack from the tool.
Steps to attach the auxiliary side handle for better control.
Procedure for inserting and removing drill bits and driver bits into the chuck.
How to select drilling or driving mode for model 2606-20.
Instructions for selecting low or high speed settings for optimal performance.
How to operate the forward, reverse, and lock control switch for directional changes.
How to start, stop, and control the tool's speed using the trigger.
Guidance for drilling in wood, plastics, and composite materials.
Guidance for drilling in various metal types, including lubrication.
Guidance for drilling into masonry materials using hammer drill mode.
Instructions for driving screws and running nuts, including clutch settings.
Guidelines for keeping the tool, battery, and charger in good repair.
Instructions for cleaning the tool and its components to prevent damage.
Information on where to send the tool for professional repairs.
