Milwaukee M18 2615-20 User Manual

OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
Cat. No.
No de cat.
2615-20
M18 CORDLESS 3/8'' RIGHT ANGLE DRILL
10 mm (3/8") POIGNÉE COUDEE ANGLE DROIT M18
TALADROS EN ANGULOS RECTOS, DE 10 mm (3/8") DE M18
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.

Milwaukee M18 2615-20 Specifications

General

Voltage	18V
Chuck Size	1/2 inch
Speed Settings	2
Weight	4.3 lbs
Tool Weight	4.3 lbs
Type	Cordless
Battery Type	Lithium-Ion

Summary

General Power Tool Safety Warnings

Work Area Safety

Advice on maintaining a clean, well-lit, and safe work environment.

Electrical Safety

Guidelines for safe use of electrical power tools, including plugs, cords, and grounding.

Personal Safety

Recommendations for operator safety, including alertness, PPE, and preventing unintentional starts.

Power Tool Use and Care

Power Tool Use

Instructions on proper usage, forcing the tool, switch operation, and maintenance.

Battery Tool Use and Care

Guidelines for using and caring for battery packs and chargers.

Operation

Installing Bits

Procedure for installing and removing drill bits using the keyless chuck.

Using the Adjustable Clutch

How to adjust the clutch for driving screws into different materials.

Using Control Switch

Explanation of the forward, reverse, and lock positions of the control switch.

Starting, Stopping and Controlling Speed

Instructions on how to start, stop, and vary the speed using the paddle switch.

Applications and Maintenance

Applications

Guidance on drilling and driving screws, including recommendations for wood.

Maintenance

Instructions for tool care, cleaning, and when to seek professional repairs.