Milwaukee M18 2802-20 User Manual

Cat. No. / No de cat.
2802-20
M18™ COMPACT BRUSHLESS 1/2" HAMMER DRILL/DRIVER
PERCEUSE À PERCUSSION DE 13 mm (1/2") M18™
TALADRO PERCULOR A PERCUSIÓN DE 13 mm (1/2") M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee M18 2802-20 Specifications

General

Voltage	18V
Chuck Size	1/2 inch
Max Torque	1, 200 in-lbs
Speed Settings	2
No Load Speed (High)	2, 000 RPM
Power Source	Battery
Chuck Type	Keyless
Max RPM	2, 000 RPM
Torque	1, 200 in-lbs
Battery System	M18
Battery Type	Lithium-Ion
No Load Speed (Low)	550 RPM
No Load Speed	2, 000 RPM

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, well lit, and free of hazards.

Electrical Safety

Precautions to prevent electric shock when using power tools.

Personal Safety

Guidelines for user alertness, protective equipment, and tool handling.

Specific Safety Rules for Hammer Drill/Drivers

Safety Instructions for All Operations

General safety advice for using the tool across various tasks.

Safety Instructions When Using Long Drill Bits

Specific guidance for safe operation with extended drill bits.

Specifications

Assembly

Removing/Inserting the Battery

Procedures for safely installing and removing the battery pack.

Installing Bits

Steps for securely fitting and removing drill or driver bits.

Operation

Tool Modes and Speed Selection

How to choose the correct tool mode and adjust speed for tasks.

Applications

Drilling Applications

Techniques and advice for drilling various materials.

Driving Screws and Nut Running

Instructions for using the tool for driving screws and nuts.

Overloading Warning

Warning about tool damage from continuous overloading.

Maintenance

Maintaining Tool

Keeping the tool in good working order through regular checks.

Cleaning

Proper methods for cleaning the tool and its components.

Repairs

Information on where and how to get the tool serviced.

Service Information