© 2009 MIMAKI ENGINEERING CO.,LTD.
7.1.4 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Troubleshooting > Details on Errors and Malfunctions > Trouble with No Messages
Model CJV30/TPC Issued 2009.06.30 Revised F/W ver. 1.00 Remark
1.0
7.1.4 Trouble with No Messages
Outline
This explains the troubles where no Error nor Warning messages displays.
Trouble list
No. Phenomenon Contents or Causes Solution
1 The machine generates strange
noise while operating.
1.
Y belt noise 7.2.1
2.
X or Y motor hunting
2 The power cannot be turned on
1.
Head, FFC, main PCB, or slider PCB trouble 7.2.3
2.
The power supply PCB damage
3.
Poor connection of the connector
3 Abnormal discharging
1.
Head, FFC, main PCB, or slider PCB trouble 7.2.3
4 Y belt derailment or damage
1.
Y-T pulley tilt 7.2.4
To Next Page
Loading...
Need help?
General