MIMAKI CJV30-130 - Page 32

© 2009 MIMAKI ENGINEERING CO.,LTD.
1.2.10 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Operating Principle > Maintenance Function > Aqua->Sol EXCHG.
Model CJV30/TPC Issued 2009.08.25 Revised F/W ver. 2.00 Remark
1.0
Rev.
1.2.10 Aqua->Sol EXCHG.
 Functional Overview
The function is to replace aqueous pigmented ink with solvent ink on same machine.
Maintenance Open Mode is selectable while filling up aqueous pigmented ink
Menu :> FUNCTION>Maintenance>Aqua->Sol EXCHG.
 Processing Sequence
“DISCHARGE & WASH” + “Initial Filling” performs when starting-up
Solvent ink becomes selectable with “Initial Filling” in this function.
 Requisite for this function
Head cleaning cartridge (cleaning cartridge for aqueous pigmented ink) SPC-188S
Solvent ink filling cartridge SPC-0475
 If normal “Discharge &Wash” is performed while using aqueous pigmented ink,solvent ink is not
selectable when initial ink filling.