MIMAKI CJV30-130 - Setting a Scanning Direction

3-18
Setting a Scanning Direction
1
Perform the operations in P.3-16 Steps 1 to 6.
2
Press to select [SCAN DIRECTION].
3
Press the key.
4
Press to select a scanning direction.
• Set value : Bi-D, Uni-D
5
Press the key.
6
Press the key several times to end the setting.
Set Value Overview
Bi-D
Printing is performed in both outward and return directions of the printer unit.
Select this when you want to print in a shorter period of time.
Uni-D
Printing is performed only in the outward direction of the printer unit.
Select this when you want to print finer.
[1]PRINT MODE
DRAFT QUA L I TY < e n t >
[1]PRINT MODE
SCAN D I RECT I ON <e n t >
[1]PRINT MODE
ScanDIRECTION:
B i-D
[1]PRINT MODE
ScanDIRECTION:
U ni -D
[1]PRINT MODE
SCAN D I RECT I ON <e n t >