6-41
Other Maintenance Functions
6 6
Maintenance
4
Close the waste ink tank guard.
• Align the protrusion of the waste ink tank guard with the hole of the main body and lock the tank.
v
5
Press the key in LOCAL to select the
printing mode.
6
Select [Ink Tank Replace] of the maintenance menu.
(1) Press the key.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [Ink Tank Replace].
7
Press the key.
8
Press the key.
• The amount of discharged ink controlled by this machine is reset, and the confirmation message is
canceled.
9
Press the key several times to end the setting.
To Next Page
Loading...
