3-27
3
Extended Functions – Printer –
Other Settings
Change the settings according to the types of use.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Press the key.
4
Press to select one of the types (1 to 4) and press the key.
5
Press to select an item to set.
• See "List of Settings". (P.3-28)
6
Press the key.
7
Press to select a set value.
• See "List of Settings". (P.3-28)
8
Press the key.
9
Press the key several times to end the setting.
• The set value is retained even when the power is turned “OFF”.
<LOCAL. 1> [ #01 ]
WIDTH:****mm
FUNCT I ON
SETUP <ENT>
SETUP
SELECT : TYPE . 1
To Next Page
Loading...
