6-18
When Nozzle Clogging Cannot Be Solved
When nozzle clogging cannot be solved even after the ink head cleaning ( P.2-36) or head nozzle washing
( P.6-11) has been done, perform the following two functions:
FILL UP INK
1
Press the key in LOCAL to select the
printing mode.
2
Select [HD. MAINTENANCE] of the maintenance menu.
(1)Press the key.
(2)Press to select [MAINTENANCE] and press the key.
(3)Press to select [HD. MAINTENANCE].
(4)Press the key.
3
Press the key.
• Ink is supplied automatically.
• When ink has been supplied completely, the screen returns to the
shown on the right.
4
Press the key several times to end the setting.
FILL UP INK
• Ink is supplied to solve nozzle clogging.
DISCHARGE & WASH
• The head, tube, and damper are washed with dedicated cleaning solution (optional).
( P.6-19)
<LOCAL. 1> [ #01 ]
WIDTH:****mm
FILLING UP
00 : 00
HD . MA I NTENANCE
FI LL UP INK <en t >
To Next Page
Loading...
