MIMAKI CJV330 Series - Media End Face Guide Film Replacement (TS)

4. Consumable Item Replacement
33
Media end face guide film replacement (TS)
Replace the media end face guide film if it is creased or worn.
1
Turn the knob screw and open the end face guide cover.
1
2
2
Rotate the end face guides to remove them.
1
2
3
Remove the media end face guide film from the media end faceguide.
• Make sure no parts of the double-sided tape remain.
4
Remove the double-sided tape on the media end face guide film and attach it to the media end
face guide.
• Align and attach the film hole (×2) to the screw hole (×2) of the media end face guide.
/HIWVLGH5LJKWVLGH