12
© 2014 MIMAKI ENGINEERING CO., LTD. All Rights Reserved. D902454-11
UV FAN Filter will be getting dirt.
Replace the filter periodically when it is dirt.
Depending on the environments and printing conditions, the filter condition is different.
Check the filter condition when cleaning every day.
・Replace the filter periodically when it is dirt.
When the following error is shown, replace the filter.
・If the printer is working, replace the filter after the job is completed.
・Even though the following error is shown, the machine is not stop immediately.
We recommended the genuine products for the replacement filter for UV FAN.
It may not to obtain the filtering effect sufficiently if you do not use the genuine products.
・Record the UV unit position before the operation.
・Move the UV Unit to the front.
・Please follow the next page to replace the filter.
・Reposition the UV Unit in place.
UV FAN Filter replacement estimated time
１
2
ERROR 706
UV LAMP TEMP HIGH
Preparations
1
2
3
4
To Next Page
Loading...
