MIMAKI JFX500-2131 - Page 21

Mimaki Europe B V
Industrial Products
• The high gap printing
• Maximal thickness of the substrate is 50mm
• Maximum substrate weight up to 50kg/m
2
• As for the print gap
• The gap between the head and the substrate should be less than 2mm
• When more than 2mm
• The ink drop tends to become mist
• The reflected light from the UV curing lamp increases
• In correct drop placement on the media
• Nozzle clogging
• Reflected light may change the viscosity of the ink mist
High Quality Printing
21
Substrate
Scan direction
Less than 2mm of print
gap is recommended.
The thickness of the material
should be less than 50mm.