MIMAKI JV300-130 - Page 10

10
10. Replace or clean when it is dirty
(1) Replacing the exhaust BOX filter or exhaust BOX.
Replace the exhaust BOX filter (product number: SPA - 0249) or the exhaust BOX (product number: SPA -
0248) when it is dirty with ink.
1
Remove the tabs (2 locations) on the
exhaust BOX.
• There are tabs engaged at the rear of the exhaust box
also.
2
Remove the exhaust BOX and exhaust BOX
filter.
3
Replace the exhaust BOX filter or the
exhaust BOX with a new one.
4
Attach the exhaust BOX filter to the exhaust
BOX.
• Insert the exhaust BOX filter in the exhaust BOX tabs.
5
Attach the exhaust BOX to its original location.
• Engage the exhaust box rear tabs into the machine body, then push in the front part of the box.
Exhaust BOX filter
Exhaust BOX
Exhaust BOX filter
Exhaust BOX