MIMAKI TS100-1600 - When Not in Use for Extended Periods

3. Maintenance Procedure
15
2
Remove the filter.
Blowing fan filter
3
Wash the filter.
• Dry the filter after washing.
4
Attach the dry filter together with the fan filter cover.
• Push in the fan filter cover until the tab clicks.
When Not in Use for Extended Periods
Clean as follows if the product is not used for one week or longer:
Check beforehand
Is [Near End] or [Ink End] displayed?
• Maintenance liquid and ink is aspirated during the washing operation. Washing is not possible if an
error occurs during this process. Replace with new ink.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Custody Wash], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
4
Clean the wiper and bracket.
• "Wiper Cleaning"(P. 6)