2. Maintenance Items and Timing
5
2. Maintenance Items and Timing
Timing Item
Periodically Shake the Ink bottle. "Ink Maintenance"(P. 6)
At the end of the work
week
Clean the wiper and wiper bracket. "Wiper Cleaning"(P. 6)
Clean the cap rubber. "Cap Cleaning"(P. 8)
Clean the NCU. "NCU Cleaning"(P. 9)
Clean the underside of the carriage. "Carriage Underside Cleaning"(P. 9)
Clean the DAS sensor. "Automatic Correction Sensor Cleaning"(P. 10)
Clean the ink discharge channel. "Ink Discharge Channel Cleaning"(P. 11)
Clean the media sensor. "Media Sensor Cleaning"(P. 12)
Clean the media holder. "Media Holder Cleaning"(P. 13)
Clean the platen. "Platen Cleaning"(P. 13)
Clean the cover (exterior). "Cover (Exterior) Cleaning"(P. 14)
Check the waste ink levels in the waste ink tank. "Replace the waste ink
tank."(P. 30)
At the end of two
weeks’ work
Clean the blowing fan filter. "Blowing Fan Filter Cleaning"(P. 14)
When not used for
more than a week
Clean the wiper and cap and wash the ink discharge channels. After cleaning,
store without turning off the main power supply. "When Not in Use for
Extended Periods"(P. 15)
Items Required for Maintenance
To order replacement consumable items, contact your local dealer or our service office.
Item Code
Maintenance solution kit 03 ML003-Z-K1
Cleaning Stick for Head Surrounding SPC-0527
Swab 6-axis "S" A101438
BEMCOT M-3 A101437
KIMWIPE S-200 SPA-0207
Maintenance cloth SPC-0574
Safety glasses
Gloves
For more information on other consumable items, refer to our website.
https://mimaki.com/supply/inkjet.html
• Avoid storing this product in locations accessible to children.
To Next Page
Loading...
