MIMAKI TS100-1600 - Exhaust Fan Filter Replacement

4. Consumable Item Replacement
23
6
Clean the carriage base.
Carriage base
7
Attach a new cap absorber.
• Push the tabs on the cap absorber into the slits at the rear of the C slider, and clip in the tabs at
the front.
Claw
Cap absorber
Push in to engage tabs.
8
Once replacement is complete, move the wiper back to the rear by hand.
9
Close the front cover, then turn on the power.
• Check to confirm that the carriage returns to the station.
Exhaust Fan Filter Replacement
Check the exhaust fan filter condition. Replace if very dirty.
1
Remove the exhaust fan box.
• Push the tabs at the front to remove the exhaust fan box.