4. Consumable Item Replacement
28
2
Select [Station] > [Carriage Out] > [Move To Platen Right End], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
• The carriage can be moved by hand. Move the carriage slowly to a position allowing easy
access for replacing the cutter.
4
Unscrew the screw, then open the carriage cover hatch.
5
Replace the media cutter.
(1) Unscrew the cutter screw.
(2) Remove the cutter.
(3) Attach a new cutter.
(4) Tighten the screw to clamp the cutter.
6
Close the carriage cover hatch, then retighten the screw.
7
Once replacement is completed, close the cover, then press the [ENTER] key.
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
To Next Page
Loading...
