EasyManuals Logo

Mimosa C5c User Manual

Mimosa C5c
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Mimosa Client Help Content
Mimosa Clients Mounting & Grounding
Copyright © 2014 Mimosa Page 27
Security
A security fastener tie point is included at the bottom of the NID to thwart and provide evidence of causal
tampering. If an unauthorized party wishes to access the network, they could also cut and re-terminate the Ethernet
cable in the absence of a NID. In either case, an they would need to bring their own DHCP router and DC power
supply to access the customer’s router, which is presumably also protected by a suitable firewall. They could access
the C5 so long as they brought a passive 48V DC power supply, but they would need to know the IP address,
password and VLAN if applicable. Most operators filter and manage traffic at upstream routers using VLAN or MAC
filtering to prevent unauthorized access such as when end customers do not pay their bill.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mimosa C5c and is the answer not in the manual?

Mimosa C5c Specifications

General IconGeneral
Antenna Connector2x RP-SMA
Max Power Consumption10W
Product NameMimosa C5c
CategoryWireless Access Point
Max Transmit Power27 dBm
Frequency Band5 GHz
Channel Bandwidth20/40/80 MHz
Ingress ProtectionIP55
Operating Temperature-40 to +55° C (-40 to +131° F)
Wireless Protocol802.11ac
Max Data Rate867 Mbps
Operating Frequency4900-6200 MHz
Ethernet Ports1 x 10/100/1000 Mbps
Power MethodPassive PoE
MIMO2x2
Power SupplyPassive PoE

Related product manuals