Mimosa Client Help Content
Mimosa Clients Link
Copyright © 2014 Mimosa Page 50
Link Configuration Settings
The Link Configuration panel includes controls to define the 5 GHz SSID and passphrase between radios:
Link Friendly Name - A friendly name to describe the link between the Access Point (AP) and Client/Station. This
●
name is used to differentiate amongst other links.
Scan for SSID - Click this button to display a list of Access Point SSIDs.
●
SSID - The wireless link name used by both radios. Both AP and Station must use the same SSID to associate
●
with each other.
Security Type - Select from the following security options:
●
Open - No authentication or encryption is used. This operational mode is not secure.
●
Pre-Shared Key - There is no user authentication but the link is encrypted using a pre-shared key.
●
Encryption Key - Enter the ASCII Passphrase to connect with the broadcasted SSID. Select "Show Key" to
●
see passphrase in plain text. Enter any combination of printable characters. The passphrase should be
between 8 to 63 characters in length. The Encryption Key must be the same on both the Access Point and
Station for them to communicate with each other.
Enterprise - Users are authenticated and encrypted using radius.
●
Username - This field is shown if the Enterprise option is selected in the Security field. Enter the username
●
for the authentication server.
Password - This field is shown if the Enterprise option is selected in the Security field. Enter the password
●
for the authentication server.
Status - Indicates whether the AP and Station are "Connected" (associated) or "Not Connected" (disassociated).
●
Please ensure that the SSID, Encryption Key, and firmware versions are the same. Additionally, ensure that the IP
addresses are different, and on the same subnet.
To Next Page
Loading...
Need help?
General
