Name: Mimosa C5c
Brand: Mimosa
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Mimosa Client Help Content

Mimosa Clients Setup

Default IP Address

Mimosa client radios can be accessed via the wired interface, which can either be set manually to a static IP or

changed dynamically via DHCP.

Notes: The wired Ethernet interface is configured by default to use DHCP with a static failover to the IP

address in the table below.

Value Wired Ethernet

IP Address 192.168.1.20

Subnet Mask 255.255.255.0

IP Address Discovery

Run the following command from the command line to discover the IP addresses of any directly connected Mimosa

devices. The string "20:B5:C6" is an Organizationally Unique Identifier (OUI), which is the first half of the MAC

address assigned to Mimosa devices. After executing the command, the IP address will be shown for each device.

Windows / DOS:

arp -a | findstr -i 20-B5-C6

Mac / Linux:

arp -a | grep -i 20:B5:C6

No CDP / LLDP Support

Mimosa radios do not respond to either CDP or LLDP at this time.

Client Setup Overview - Detailed process for configuring your device

Questions and Answers:

Need help?

Do you have a question about the Mimosa C5c and is the answer not in the manual?

Mimosa C5c Specifications

General