Name: Mimosa C5c
Brand: Mimosa
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Mimosa Client Help Content

Mimosa Clients Overview

Accessing the Graphical User Interface

Accessing the graphical user interface (GUI) requires that the radio first be connected to power. The Power over

Ethernet (PoE) connection process describes the steps to do this. Note that the GUI will be available approximately

one minute after applying power.

The GUI can be accessed in two ways to facilitate set-up and management.

Through the local Ethernet interface (LAN)1.

Remotely through the AP wireless link2.

Via Ethernet interface or in-band through the AP link

By default, the device IP address is 192.168.1.20 and can be accessed via the Ethernet port using this IP address in

any standard Web browser. To access the device via a locally connected computer initially (on the same LAN or

directly to the Ethernet port), the computer’s IP address must be on the same subnet as the above address. Once

you have modified the IP address (static or is DHCP) of the device for remote management purposes (in-band over

wireless or over the Ethernet interface), the new specified IP address must be used to access the device.

Questions and Answers:

Need help?

Do you have a question about the Mimosa C5c and is the answer not in the manual?

Mimosa C5c Specifications

General