Need help?Do you have a question about the Minarik Motor Master 20000 Series and is the answer not in the manual?
General| Operating Temperature | 0 to 40°C |
|---|---|
| Speed Range | 50:1 |
| Enclosure | NEMA 1 |
| Input Voltage | 115/230 VAC |
| Output Voltage | 0-90 VDC |
| Speed Regulation | 1% of base speed |
| Control Method | SCR |
Explains the numbering system for input voltage, configuration, type, features, and revision.
Instructions on how to physically mount the drive unit.
Guidelines and requirements for electrical wiring connections.
Recommendations for shielding conductors to minimize electrical noise.
Details on connecting the speed adjustment potentiometer.
Information on heat dissipation requirements and line fuse selection.
General information about making electrical connections to the drive.
Critical checks before powering up and initial drive startup procedures.
Various methods for starting, stopping, and controlling motor operation.
How to implement dynamic braking for rapid motor deceleration.
Step-by-step guide for calibrating the drive's settings.
How to set and calibrate minimum and maximum speed limits.
Procedures for setting and calibrating motor acceleration and deceleration times.
How to calibrate IR compensation and torque limit settings.
Implementing forward, stop, reverse switches and reversing with braking.
Setting up independent, series, or multiple fixed speeds.
Using RUN/JOG switches, leader-follower, and multi-drive control.
Initial checks and preparation steps before diagnosing issues.
List of available replacement parts and their Minarik part numbers.
Details specifications for required external filtering for CE compliance.
To Next Page
