Need help?Do you have a question about the Mindeo CR40 Series and is the answer not in the manual?
General| Image Sensor | CMOS |
|---|---|
| Scan Rate | Up to 60 fps |
| Power Supply | 5V DC ± 5% |
| Humidity | 5% to 95% (non-condensing) |
| Supported Symbologies | Code 39, Code 93, Code 128, Codabar, Interleaved 2 of 5, PDF417, Data Matrix, QR Code |
| Scan Mode | Manual, Continuous |
| Light Source | LED |
| Interface | USB |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Connectivity | USB, RS232, Keyboard Wedge |
Details scanner hardware specifications like working range, radio link, data storage, and power.
Lists default settings for various barcode types, including enable, verification, and transmission.
Provides the physical dimensions of the scanner with a diagram.
Identifies and labels the key physical components of the scanner.
Step-by-step guide for connecting and installing via USB HID keyboard mode.
Step-by-step guide for connecting and installing via USB Virtual COM mode.
Instructions on how to turn the scanner on and off using the power switch.
Details the methods and time required to charge the scanner's battery.
Explains the basic scanning process and different scan modes.
Covers various methods for transferring data, including Bluetooth and USB.
Explains LED indicators, beeps, and vibrations for status updates.
Demonstrates configuring settings by scanning specific barcodes.
Reference table for common settings and their programming barcodes.
Configures scanning behavior, data handling, and output formats.
Adjusts the scanner's audible and tactile feedback.
Controls the scanner's aiming light and illumination for barcode reading.
To Next Page
