Mindeo CS2290 User Manual (English)

To Next Page

Note: 1. See user manuals for more information. 2. For better readability, please print this document with laser printer. 3. Version: CS2290_QG_EN_V1.1.

CS2290 Cordless Image Scanner Quick Guide

Notice

Parts of the handheld unit

① Scan window ② Trigger (Press to triggr / Long press 2 seconds to turn on)

③ Beeper ④ Power indicator (Blue LED) ⑤ Successful decoding indicator

(Green LED) / Communication fail indicator (Red LED) / Charging (Red LED)

Parts of the cradle

⑥ Power indicator (Blue LED)

⑦ Communication indicator (Green LED)

⑧ Key (Long press 2 seconds to restore factory default

setting of cradle)

Installation of cradle

1. Switch off power of the host. Refer to the below pictures, connect the host with the

scanner with different cables firstly, and then connect the adaptor to the power socket.

2. Ensure that all connections are secure. Switch on the power of the host. After a few

seconds, if only the blue LED on the cradle is ON, it indicates the cradle is in normal

working mode.

USB cable

RS232 cable

PS/2 keyboard cable

Charge battery

1. Please charge the battery before the first time of use.

The charge indicator (Red LED) on the handheld unit is

turned on when the charging is in process. When the

charging process completes, the charge indicator (Red

LED) is turned off.

2. Charging time: 4 hours for fully charged.

3. You can charge the battery via a USB port on the device or

an optional 5 VDC adapter.

Indication of handheld unit for wireless data transmission

Successful

Transmission

Beeper

Red LED

Vibration

Yes

Off

Three beeps

Blinks 3 times, and

then turns off

Short vibrates 3 times,

and then turns off

Programming instruction and example

Two programming modes have been provided as bellows:

 Single-scan setting

Scan the appropriate

Single-scan setting

Example: To set Flow control to be XON/XOFF.

 Multiple-scan setting

Scan “Option bar code”

Scan “The 1st character of option”

Scan “The 2nd character of option”

Scan “END”

Example: To set Flow control to be XON/XOFF.

A standard kit contains: a handheld unit, a cradle, a USB cable, and a CD-ROM

(containing software and manuals).

 It is suggested to read the user manual in details before use.

Need help?

Do you have a question about the Mindeo CS2290 and is the answer not in the manual?

Mindeo CS2290 Specifications

General

Image Sensor	CMOS
Resolution	752x480 pixels
Scan Rate	300 scans per second
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Type	Handheld
Interfaces Supported	USB
Operating Temperature	0°C to 50°C
Drop Resistance	1.5m
Scanning Technology	2D Imager
Supported Barcodes	1D, 2D, GS1
Operating System Compatibility	Windows, Linux, Android