EasyManua.ls Logo

Mindeo CR40-1D - User Manual

Mindeo CR40-1D
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CR40 Bluetooth Ring Scanner
User Manual
Version: CR40_UM_EN_V1.1.1
Question and Answer IconNeed help?

Do you have a question about the Mindeo CR40-1D and is the answer not in the manual?

Summary

1 Specifications

1-1 Technical specifications

Detailed technical parameters of CR40-1D and CR40-2D models.

2 Introduction to installation

2-1 Installing a USB HID keyboard wired scanner

Steps for connecting and installing the scanner via USB HID keyboard mode.

2-2 Installing a USB virtual COM wired scanner

Steps for connecting and installing the scanner via USB Virtual COM mode.

3 Operations of the scanner

3-3 Scan

Procedure for scanning barcodes and understanding scan modes.

3-4 Data Transfer

3-4-1 Bluetooth

Configuring and performing data transfer via Bluetooth.

3-4-2 USB HID Keyboard

Setting up data transfer using USB HID Keyboard mode.

3-4-3 USB Virtual COM

Setting up data transfer using USB Virtual COM mode.

3-4-4 Standard Batch

Storing and sending barcodes in Standard Batch mode.

4 Barcode programming instructions

4-1 Example: Single-parameter setting by scanning 1 D barcode

Demonstrates programming a single parameter using a barcode.

4-2 Common settings of the scanner

Overview of frequently used scanner configuration settings.

4-3 Scanning mode and some global settings

Scanning mode options (Good-read off, Momentary, Continue)

Different modes for activating and operating the scanner trigger.

4-5 Decode illumination and decode aiming pattern

4-6 DPM, Multiple symbols, Structured append, etc. read setting

4-7 UPC-A

4-10 EAN-13 (ISBN;ISSN)

4-12 Code 39 (Code 32, Trioptic Code 39)

4-35 G1-G6 & C1-C3 & FN1 substitution string setting

4-37 String transmission

Mindeo CR40-1D Specifications

General IconGeneral
BrandMindeo
ModelCR40-1D
CategoryBarcode Reader
LanguageEnglish

Related product manuals