Need help?Do you have a question about the Mindeo MD20 series and is the answer not in the manual?
General| Brand | Mindeo |
|---|---|
| Model | MD20 series |
| Category | Barcode Reader |
| Language | English |
Lists detailed technical parameters of the barcode scanner, including voltage, power, current, and laser specifications.
Details default configurations for various barcode symbologies, such as read enable and check digit verification.
Illustrates the scanner's decode range and conditions based on resolution and barcode type.
Details the pinout and electrical connections for scanner interfaces (RS-232 and USB).
Provides physical dimensions of the scanner and its accessories, including the stand.
Identifies the main components and features of the barcode scanner, such as LED and trigger.
Guides the user through the initial setup and connection procedures for RS-232 and USB.
Provides guidance on how to assemble the optional scanner stand securely.
Basic instructions on how to perform a successful scan by crossing bars and spaces.
Explains the auto-detection feature and provides methods to enable or disable it.
Overview of programmable parameters, factory defaults, and methods to change settings.
Demonstrates how to configure scanner settings using specific setup barcodes.
Details RS232 interface settings, flow control, and data packet formats.
Explains USB interface options like HID keyboard and Virtual COM, including keyboard layouts.
Configures scanning modes, standby duration, barcode delay, and multiple confirm settings.
Describes audible and visual indicators for scanner status, including beep tone and volume.
Configuration options specific to the UPC-A barcode symbology, including check digits and transmission.
Configuration options specific to the UPC-E barcode symbology, including check digits and transmission.
Configuration options specific to the UPC-E1 barcode symbology, including check digits and transmission.
Configuration for EAN-13, ISBN, and ISSN barcodes, including conversions and ink spreading.
Configuration options specific to the EAN-8 barcode symbology, including check digits and transmission.
Settings for Code 39, Code 32, and Trioptic Code 39, including length and transmission.
Configuration options for Interleaved 2 of 5 barcodes, including check digits and length.
Configuration options for Industrial 2 of 5 barcodes, including check digits and length.
Configuration options for Matrix 2 of 5 barcodes, including check digits and length.
Configuration options for Codabar barcodes, including check digits and start/end transmission.
Configuration options for Code 128 barcodes, including check digits and truncation.
Configuration options for UCC/EAN 128 barcodes, including check digits and truncation.
Configuration options for ISBT 128 barcodes, including check digits and length.
Configuration options for Code 93 barcodes, including check digits and length.
Configuration options for Code 11 barcodes, including check digits and length.
Configuration options for MSI/Plessey barcodes, including check digit verification methods.
Configuration options for UK/Plessey barcodes, including check digit verification methods.
Configuration options for China Post barcodes, including code length and ID setting.
Configuration options for Telepen barcodes, including character set type and length.
Configuration for GS1 DataBar Truncated symbology, including code ID and conversion.
Configuration for GS1 DataBar Limited symbology, including code ID and conversion.
Configuration for GS1 DataBar Expanded symbology, including code ID and conversion.
Customizes data strings by substituting G1-G4 characters and FN1.
Sets the positions for inserting G1-G4 strings and the placement of the Code ID.
Controls the transmission of prefixes, suffixes, code names, and other string elements.
To Next Page
