What to do if scanned data is incorrectly displayed on the host using Mindeo Barcode Reader?
If the Mindeo Barcode Reader displays scanned data incorrectly on the host, ensure that the proper host is selected. If you are using RS-232, verify that the scanner’s communication parameters match the host’s settings.
Why Mindeo Barcode Reader laser is on, but the scanner does not decode?
If the laser on your Mindeo Barcode Reader comes on but it doesn't decode, first, check the barcode itself to ensure it is not damaged. Try scanning other barcodes of the same type to test. Also, verify that your scanner is programmed to read the specific type of barcode you are attempting to scan. Finally, adjust the distance between the scanner and the barcode to see if that resolves the issue.
General| Scanning Technology | Laser |
|---|---|
| Resolution | 4 mil |
| Interfaces Supported | USB, RS232 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 5% to 95% (non-condensing) |
| Drop Resistance | 1.5m |
| Operating Voltage | 5V DC |
| Drop Specification | 1.5 m |
Critical warnings for severe injury or death, focusing on battery and unit handling.
Warnings for unit handling, laser use, and lithium-ion battery safety.
Cautions for unit placement, foreign objects, heavy objects, and battery environmental factors.
Technical details of the handheld scanner, including range, dimensions, battery, and performance.
Specifications for the cradle and power adaptor, covering voltage, dimensions, and operating conditions.
Labeling of the handheld scanner's buttons, indicators, and sockets.
Labeling of the cradle's buttons, indicators, and antenna.
Step-by-step guide for installing the scanner cradle via PS/2 and USB interfaces.
A walkthrough of scanner programming using setup barcodes and data entry.
Explanation of point and distributed coordination wireless network types.
Configuration options for point coordination wireless communication.
Configuration options for distributed coordination wireless communication.
Settings for using the scanner as a keyboard wedge device.
Configuration parameters for the RS-232 serial communication interface.
Configuration options for USB device types and communication speeds.
Global settings for scanning modes, code lengths, and string selections.
Configuration for scanner feedback via LEDs and beeps.
Specific settings for UPC-A barcode reading, including digit transmission and ID.
Specific settings for UPC-E barcode reading, including digit transmission and ID.
Specific settings for UPC-E1 barcode reading, including digit transmission and ID.
Settings for EAN-13 barcodes, ISBN, and ISSN conversions.
Specific settings for EAN-8 barcode reading, including digit transmission and ID.
Configuration for Code 39, Code 32, and Trioptic Code 39 barcodes.
Settings for Interleaved 2 of 5 barcode reading and transmission.
Settings for Industrial 2 of 5 barcode reading and transmission.
Settings for Matrix 2 of 5 barcode reading and transmission.
Settings for Codabar barcode reading and transmission.
Settings for Code 128 barcode reading and transmission.
Settings for UCC/EAN 128 barcode reading and transmission.
Settings for ISBT 128 barcode reading and transmission.
Settings for Code 93 barcode reading and transmission.
Settings for Code 11 barcode reading and transmission.
Settings for MSI/Plessey barcode reading and transmission.
Settings for UK/Plessey barcode reading and transmission.
Settings for China Post barcode reading and transmission.
Configuration options for GS1 DataBar Truncated barcodes.
Configuration options for GS1 DataBar Limited barcodes.
Configuration options for GS1 DataBar Expanded barcodes.
Settings for China Finance barcode reading and transmission.
Settings for Telepen barcode reading and transmission.
Configuration for G1-G4 and FN1 character substitution in barcode data.
Settings for string insertion positions and Code ID placement.
Configuration for transmitting prefixes, suffixes, and other string data with barcodes.
To Next Page
