Mindeo CS3290 - 9-11 UPC-E Barcode Settings

26
9-4-3 Distributed coordination wireless communication setting for cradle
Wireless network topology for cradle: There are two kinds of wireless network topology that can be
employed: point coordination and distributed coordination.
Radio power level for cradle: By selecting, you can change the radio frequency power level for cradle.
SETUP
Option barcode
Options
Value
Wireless network topology for cradle※
Point coordination
Distributed coordination
00
01*
Radio power level for cradle※
10dbm
7dbm
5dbm
0dbm
-5dbm
-10dbm
-15dbm
01*
02
03
04
05
06
07
END
Displaying wireless communication result for cradle※
Note: The settings indicated with (※) are valid only when the cradle is in upgrade ready mode.
Cradle entering upgrade ready mode
Keep pressing the S button on the cradle, until the blue LED is flashing. Then three LEDs will all be
turned ON, this indicates the cradle being upgrade ready mode.